Skip to main content

Genie Opener Guides

Genie openers have used Intellicode rolling code since 1995, and current models pair with the Aladdin Connect app. Current Genie units are programmed with a PROGRAM button, up and down arrow buttons, and two LEDs, a round one and a long one, whose colours tell you what the opener is doing.

Generic belt drive garage door opener motor unit with a program button and two indicator LEDs

Which Genie opener do I have?

Look at the buttons on the motor unit. They tell you which generation you have and which set of steps to follow.

Where to look: On the motor unit. Openers from 1995 to 2011 have a LEARN CODE button. Current units have a PRGM/SET button, up and down arrow buttons marked + and -, a round LED, and a long LED. The exact layout varies by model.

  • PRGM/SET button, + and - arrows, round and long LEDs

    Years:
    About 2011 to today
    System:
    Intellicode 2 rolling code
    Remotes that pair:
    Current Genie Intellicode remotes and keypads. Aladdin Connect on built-in Wi-Fi models or with the retrofit kit.
  • LEARN CODE button

    Years:
    1995 to 2011
    System:
    Intellicode rolling code
    Remotes that pair:
    Genie Intellicode remotes, including current Genie remotes. On 1995 to 1997 units, only the top two buttons of a 3-button remote work.
  • Code switches inside the remote and the opener

    Years:
    Before 1995
    System:
    Fixed code, 9 or 12 three-position switches
    Remotes that pair:
    Remotes with the same switch pattern. No rolling code, so worth replacing for security alone.

Ready to Book?

Same-day service across Winnipeg and nearby communities. Free on-site diagnosis on every residential repair.

CallBook